DIRECTION FOR USE
A. Pour the entire content of this product into the spa water to dislodge accumulated debris from the pipes.
B. Run the pump(s) for three cycles. Rinse the filter cartridge(s) during this time.
C. Completely drain all water from the spa.
D. Refill the spa and adjust the pH to 7.2 and total alkalinity to 120 ppm.
A. Pour the entire content of this product in the hot tub.
ORGANIC SUBSTANCES REMOVER
A. Pour one dose of this product into the spa water. The bottle contains three doses, which are clearly indicated on the product label. Pour a small amount at a time until you reach the indicator line for that dose.
A. Add 20 grams (1 scoop). Avoid direct contact with skin. During the first month and in periods of intense heat and higher than normal spa usage, two (2) doses should be added in the same week.
A Pour the content of one pouch into the spa water.
A. Turn the power off.
B. Place one SPANATURALLY® blue strip in the skimmer basket (MAKE SURE IT IS NOT PLACED BETWEEN THE OUTER CARTRIDGE AND THE FILTER CHAMBER OR INSIDE THE CENTER OF THE CARTRIDGE). If the spa has two cartridges place only next to one of them.
A. Add 1 tab in the hot tub
B. Rinse the cartridges 24 to 48 hours after adding to the water.
1 x Flush - 500 ml
1 x Initiateur - 500 ml
1 x Prep - 500 ml
1 x EZ San - 500 ml
1 x Halo - 200 g
12 x Brillance - 40 g
3 x SpaNaturally
1 x Spoon