Balancers products
Lo'n Slo (lower ph) - Bioguard
As low as $26.99
Product Overview
This granular stabilizer maximizes the effectiveness of non-stabilized chlorine and protects it from evaporation from the sun's UV rays. Helps chlorine last 3 to 5 times longer in pool water.
DIRECTIONS FOR USE:
1. Maintain proper daily levels; these levels are determined using a test kit.
Free available chlorine: 1.0 – 3.0 ppm
pH: 7.2 – 7.8
Total alkalinity: 80 – 120 ppm
Calcium hardness: 200 – 300 ppm
2. Protect residual chlorine from being destroyed by the sun's rays by adding 300 g per 10,000 L of pool water to reach 30 ppm. Add slowly in the skimmer.
3. To adjust the stabilizer level, keep in mind that 100 g per 10,000 L of pool water will increase the stabilizer level by 10 ppm.
DIRECTIONS FOR USE:
1. Maintain proper daily levels; these levels are determined using a test kit.
Free available chlorine: 1.0 – 3.0 ppm
pH: 7.2 – 7.8
Total alkalinity: 80 – 120 ppm
Calcium hardness: 200 – 300 ppm
2. Protect residual chlorine from being destroyed by the sun's rays by adding 300 g per 10,000 L of pool water to reach 30 ppm. Add slowly in the skimmer.
3. To adjust the stabilizer level, keep in mind that 100 g per 10,000 L of pool water will increase the stabilizer level by 10 ppm.
