Product Overview
This correct kit resolves algae and cloudy water in 48 hours. It is the recommended treatment for severe algae blooms or for sanitizing cloudy water. Also makes a great opening kit in the spring.
OPENING POOL :
For best results, always follow these steps.
1. Manually remove all leaves and debris from the water.
2. Raise the water level to the middle of the skimmer.
3. Vacuum in the “drain” or “waste” position to remove any remaining debris.
4. Raise the water level and then backwash.
5. Adjust the pH to 7.2.
6. Sprinkle the contents of accelerator and conditioner on the water’s surface.
7. Sprinkle the contents of shock treatment on the water’s surface.
8. Add the oxidizer.
9. Add the clarifier. Run the filter for 48 hours, and then backwash.
DURING THE SUMMER :
1. Do a backwash and raise the water level if needed.
2. Adjust the pH to 7.2.
3. Sprinkle the contents of accelerator and conditioner on the water’s surface.
4. Sprinkle the contents of shock treatment on the water’s surface.
5. Add the oxidizer.
6. Add the clarifier. Run the filter for 48 hours, and then backwash.
OPENING POOL :
For best results, always follow these steps.
1. Manually remove all leaves and debris from the water.
2. Raise the water level to the middle of the skimmer.
3. Vacuum in the “drain” or “waste” position to remove any remaining debris.
4. Raise the water level and then backwash.
5. Adjust the pH to 7.2.
6. Sprinkle the contents of accelerator and conditioner on the water’s surface.
7. Sprinkle the contents of shock treatment on the water’s surface.
8. Add the oxidizer.
9. Add the clarifier. Run the filter for 48 hours, and then backwash.
DURING THE SUMMER :
1. Do a backwash and raise the water level if needed.
2. Adjust the pH to 7.2.
3. Sprinkle the contents of accelerator and conditioner on the water’s surface.
4. Sprinkle the contents of shock treatment on the water’s surface.
5. Add the oxidizer.
6. Add the clarifier. Run the filter for 48 hours, and then backwash.