1180, rue Desserte O (A-13), Local 500 Laval, QC, H7X 3S9
Monday - Friday: 10:00 - 18:00
Saturday: 09:00 - 17:00
Sunday: 10:00 - 17:00
Not available
Quebec
909, boul. Pierre-Bertrand Sud Quebec, QC, G1M 3R8
Monday - Friday: 10:00 - 18:00
Saturday: 09:00 - 17:00
Sunday: 10:00 - 17:00
Not available
Boucherville
1235, rue Ampère Boucherville, QC, J4B 7M6
Monday - Friday: 10:00 - 18:00
Saturday: 09:00 - 17:00
Sunday: 10:00 - 17:00
Not available
Pointe-Claire
2335, route Transcanadienne (Mega Centre des Sources) Pointe-Claire, QC, H9R 5Z5
Monday - Friday: 10:00 - 18:00
Saturday: 09:00 - 17:00
Sunday: 10:00 - 17:00
Not available
Levis
4750, boul. Guillaume-Couture Levis, QC, G6W 6W4
Monday - Friday: 10:00 - 18:00
Saturday: 09:00 - 17:00
Sunday: 10:00 - 17:00
Product Overview
This fast-acting clarifier quickly corrects cloudy pool water, improves filtration capacity and leaves water sparkling clear in just 24 hours.
DIRECTIONS FOR USE: NOTE: Application of this treatment in rainy weather is not recommended. Using this product with a diatomaceous earth filter is not recommended. 1. Fill the pool above skimmer. Adjust parameters at recommended levels. Free available chlorine: 1.0 – 2.0 ppm pH: 7.2 – 7.8 2. Stop the filtration system and put the filter in “Recirculate” (or “Whirlpool”) position. Start the system. 3. Add 400 g per 10,000 L of pool water. Sprinkle the required quantity directly on the surface of water. 4. Recirculate pool water for 4 to 6 hours. Stop filter and allow water to remain undisturbed preferably overnight to allow debris to deposit to bottom of pool. 5. Remove residue by putting filtration system in “Drain” (or “Waste”) position and vacuuming. 6. Readjust water parameters. Use pH+ to increase water pH, since using this product decreases pH. Use approximately 200 g of pH+ per 500 g of treatment to reach pH levels of 7.2 to 7.8.